The Kordon installation process

1. Preparation

Before any concrete is poured, Darren and his team map out the area where the Kordon barrier will be installed. They take precise measurements to guarantee that the barrier forms an impenetrable barrier across the entire building footprint.

3. Protecting joints

Throughout the installation, Darren demonstrates proper techniques for safely setting Kordon sheets at cold joints, concrete slabs, and locations where pipes or conduits would eventually penetrate the slab. These are essential details to get right.

The result

With the Kordon system now integrated into the foundation, this property has a highly effective first line of protection to prevent a potential termite infestation.

Allstate Pest Control’s dedicated Pre-construction team provides builders with priority access to have effective termite protection products such as Kordon during the construction process. This proactive strategy protects both the build quality and the builder’s reputation.

Established in 1986, Allstate has grown to become one of the best known and loved pest control providers for Adelaide families and businesses. Our knowledgeable and friendly technicians are available 24/7 to all suburbs of Adelaide. Fully equipped to treat pest outbreaks in residential, commercial and industrial settings, our modern and innovative treatments will ensure that your property is safeguarded from pests for years to come.

For effective and reliable pest control services, contact Allstate today.

The pest control process

1. Wall inspection
Scott begins his inspection indoors, combing through every nook and cranny of the house. With a high-performance moisture meter, he assesses moisture levels and scans walls for any signs of termite activity or damage.
2. Roof void inspection
Moving into the roof void, Scott carefully examines this area for any indications of termite intrusion or damage caused by other pests.
3. External inspection
With the indoor assessment complete, Scott shifts his focus to the exterior of the property. From the front yard to the backyard, he inspects all external walls and areas prone to moisture, such as piles of stumps, which can attract termites.

The pest control process

1. Inspection and dusting

The process begins with thorough inspection of the property for potential entry points that crawling insects can access. John starts by dusting the roof and vents around the house, creating a protective barrier against pests like moths that may try to make their way inside.

2. Targeted spraying

John then moves on to the general spray application. Armed with his professional-grade equipment, he applies a residual insecticide around the perimeter of the house, sheds, fences, and other trouble spots. This targeted treatment helps to manage any existing pest activity and prevent future infestations.

3. Customer walkthrough

Upon completion of the treatment, John takes the time to walk the homeowner through the work he has carried out.

The termite control process

Inspection

Josh begins by thoroughly inspecting the interior of the home, checking for any signs of termite activity or damage. While he finds high moisture levels in the front room shower tiles (a conducive condition), there are no active termites or termite damage detected inside.

Roof void check

Next, Josh enters the roof void to closely examine this area. Pleasingly, he finds no termites, rodent droppings, or evidence of any other pest issues up in the roof space.

Sentricon installation

With no immediate termite threats identified, Josh proceeds to install the Sentricon system as a preventative measure. After marking out the station locations with the homeowner, he digs into the soil around the property’s perimeter and places the discrete Sentricon bait stations at strategic points.

Ongoing monitoring

To maintain maximum termite protection, the Sentricon system requires regular monitoring by Allstate technicians, who will inspect the stations every 3 months and replenish baits as needed. Based on his assessment, Josh recommends the homeowner continue with annual termite inspections.

The chemical termite treatment process

• Preparation
  Josh begins by clearing access paths around the exterior walls of the home to allow for efficient treatment. Since this property had been previously treated, he locates the pre-existing drill holes to be reused.
• Exterior Drill and Inject
  Using a specialised drill, Josh reopens the series of holes around the home’s perimeter at regular intervals. This allows the termiticide chemical to be pressure-injected into the soil surrounding the property.
• Interior Drill and Inject
  Moving indoors, Josh also drills new holes through interior walls and injects termiticide into any potential termite entry points from inside the home.
• Sub-Floor Spraying
  In properties with accessible underfloor areas, Josh applies a liquid termiticide spray throughout the sub-floor space to create another defensive barrier against termites.
  
• Hole Patching
  After the chemical injections, Josh carefully patches up all the drill holes using cement to conceal the treatment points.

The pigeon control process

• Diagnosis
  Pigeons have been roosting and nesting throughout the property, leaving behind substantial accumulations of droppings, fouling, and nesting materials in gutters, roof voids, courtyards, and other areas.
• Vacuum cleaning
  The first major step is to vacuum and extract all the pigeon waste and debris using powerful industrial vacuums with specialised attachments. This rigorous cleaning process targets gutters, roof cavities, solar panels, and even hard-to-reach nooks and crannies where droppings and nests may have built up.
• High pressure cleaning
  Following the vacuum treatment, the technicians employ high-pressure water jets to thoroughly cleanse and sanitise all affected surfaces like walls, roofs, and courtyards, blasting away any residual staining or grime left behind by the pigeons.
• Gutter guard and bird netting installation
  With the property now disinfected, focus turns to prevention. Gutter guards are installed to inhibit future nesting in gutters, while bird netting is strategically placed to create physical barriers, denying pigeons access to previous roosts and potential new nesting sites.