With termites affecting 1 in 3 homes in Australia, the risk of a termite attack to your home is high. This is because their appetite for cellulose-based materials means that the wood in your home becomes an appealing food source.

Living mainly underground, subterranean termites are hard to spot and once inside your home, they can silently cause significant damage that is not visible until it is simply too late. In fact, termites are thought to cost Australian homeowners a whopping $1.5 billion every year.

Since this damage is considered highly preventable, the cost of repairs is unfortunately not covered by home and contents insurance. However, it’s reassuring to know that Allstate Pest Control can help keep you and your family safe from a termite attack.

Due to the high risk of termite attacks, the National Construction Code guidelines mandate new homes be built using termite-resistant materials and include a termite management system.

These strict requirements are in place because termites are still able to penetrate treated timber and steel roofing, and damage can affect every part of your home.

At Allstate, our pre-construction pest control team includes licensed builders with extensive knowledge and experience in termite management. We incorporate the following range of high-quality termite resistant products, covered by extensive warranties, at the appropriate stage of your build:

Kordon Termite Barrier

As certified Kordon installers, we recommend this moisture resistant barrier to protect your concrete slab.

Manufactured in Adelaide, Kordon has undergone extensive testing by the CSIRO for over two decades and has a 100% success rate in providing the best long-term chemical and physical defence against subterranean termites, when installed correctly.

Non-hazardous, hypoallergic and suitable for all building applications, Kordon is a polyester webbing embedded with deltamethrin termiticide. It is made into a highly flexible sheet which is placed between the bedding sand and steel mesh layers before the concrete slab is poured on top.

Concrete curing

To make sure that your concrete slab stays smooth and crack free and remain impenetrable to termites, we recommend Rendacure as our preferred concrete curing compound.

With excellent adhesion properties, Rendacure is fast drying, wax free and water-based, making it easy to spray or roll onto freshly poured concrete.

We also offer Deep Cure as an alternative fast and cost-effective method to internally cure concrete. Penetrating the inside of the slab, it stops excess moisture from entering by forming a water retaining gel.

Slab edge moisture protection

Protecting your concrete slab from moisture makes it far less likely to attract subterranean termites to your home. If your home is affected by dampness, this shows up as efflorescence, or coloured crystalline deposits of salt and minerals on surfaces around your home.

We suggest using the following waterproofing products during the construction of your new home to prevent efflorescence:

• Homeguard Protectacote is a bifenthrin-based, acrylic polymer latex compound that can be applied by spraying, rolling or brushing the exposed perimeter of new concrete slabs
• Ardex WPM 300 is a high performance, water-based epoxy membrane and coating which can be applied to damp concrete to form a hydrostatic pressure resistant membrane and prevent rising damp
• Xyprex concentrate sealant is applied as a concrete slurry and penetrates the tiny pores within concrete slabs to form a tough, watertight crystalline structure

Chemical reticulation systems

Building regulations make it compulsory for extensions on an existing property to include a termite barrier between your home and the new concrete slab. If baiting stations cannot be installed, this means that you may need a Termidor reticulation system. This consists of a network of underground pipes that discharge termiticide into the soil to repel termites, and requires topping up at regular intervals.